If you're looking to achieve a salon-worthy blowout at home, it's important to know the dos and don'ts of blow-drying your hair. Though it may seem like a simple task, there are many common mistakes people make that can lead to damage, breakage, and frizz. To help you get the best results, here are some tips and tricks for blow-drying your hair.
One of the most important things to do before blow-drying your hair is to use a heat protectant. Applying a heat protectant can help prevent damage to your hair caused by high temperatures. Another common mistake people make is over-drying their hair. Resist the urge to use your dryer until your hair is completely dry, as this can lead to breakage and split ends.
- Do Use a Diffuser Attachment
Using a diffuser attachment can help distribute the heat more evenly throughout your hair, reducing damage and frizz. On the other hand, using high heat on wet hair can cause your hair to lose its natural oils and lead to frizz and breakage. Instead, use a low heat setting to reduce damage and create a more natural look.
- Don't Skimp on Products
Using a good-quality shampoo, conditioner, and styling products can help protect your hair and create a better end result. When it comes to blow-drying, it's best to dry your hair in sections to achieve a more even, polished look. However, be sure not to use a brush on wet hair, as this can cause breakage and tangling. Instead, use a wide-tooth comb to detangle without causing damage.
Finally, it's important not to touch your hair too much as this can cause frizz and undo all of your hard work. If you want to set your blowout and reduce frizz, be sure to use the cold shot setting on your dryer.
Do Use Heat Protectant
It's important to always apply heat protectant before blow-drying your hair. Heat styling tools can pose a significant threat to the overall health of your hair. Heat protectants work by creating a barrier between your hair and the high heat of the dryer to prevent damage. By using a heat protectant, you can minimize the risk of hair breakage, split ends, and dryness.
There are various types of heat protectants available in the market, including sprays, serums, and creams. It's important to choose the right product for your hair type and follow the instructions on the packaging carefully. Heat protectants should be applied to your hair before blow-drying and evenly distributed throughout the strands.
Additionally, you should avoid blow-drying your hair until it's completely dry. To minimize the risk of damage, it's best to let your hair dry naturally until it's around 70-80% dry and then start blow-drying. A cool tip for making the process quicker is by gently patting your hair with a microfiber towel or t-shirt to remove excess water before applying the heat protectant.
In conclusion, using a heat protectant is crucial to prevent damage caused by high temperatures while blow-drying. It's best to let your hair air dry until it's 70-80% dry and use a heat protectant to create a barrier between your hair and the high heat of the dryer. This way, you'll be able to achieve a salon-worthy finish without compromising on your hair's overall health.
Don't Over-Dry Your Hair
It's a common misconception that drying your hair with heat until it's completely dry is the best way to achieve a salon-worthy look. However, over-drying your hair can actually cause more harm than good. When your hair is exposed to high temperatures for too long, it can lead to breakage and split ends.
Instead, try to resist the urge to use your dryer until your hair is completely dry. If you're short on time, use a towel to gently blot away excess moisture before turning on the dryer. Another tip is to use a lower heat setting to dry your hair slowly and more gently. This will not only prevent damage but also help create a more natural, voluminous look.
In addition to being mindful of the amount of time you spend drying your hair, it's also important to use the right products. Applying a heat protectant can help reduce the risk of damage caused by high temperatures. It's also a good idea to use a good-quality shampoo, conditioner, and styling products to protect your hair and create a long-lasting result.
Overall, taking steps to avoid over-drying your hair can help you achieve a healthy, beautiful look. By using a lower heat setting, waiting until your hair is mostly dry to use your dryer, and using the right products, you can create a salon-worthy look without damaging your hair.
Do Use a Diffuser Attachment
Blow-drying your hair can often lead to frizzy, damaged hair if not done properly. Using a diffuser attachment can help distribute the heat more evenly throughout your hair, reducing damage and frizz. A diffuser is a funnel-shaped attachment that is placed on the end of your dryer, and it helps spread the air over a larger area. This allows the air to flow over your hair more gently and evenly, preventing hotspots that can cause breakage.
Diffusers are particularly useful for people with curly hair, as it helps define curls and prevent frizz. However, it can be helpful for anyone, regardless of hair type. The diffuser also helps to dry your hair quickly without causing damage, making it an essential tool in your hair care routine.
- Start by applying a heat protectant to your hair before blow-drying.
- Attach the diffuser to your dryer and turn it on to a low or medium heat setting.
- Take small sections of your hair and place them in the diffuser, starting at the roots and moving towards the ends.
- Gently lift the diffuser up towards your head, allowing the air to circulate around your hair.
- Repeat this process until your hair is dry.
Using a diffuser attachment is an easy and effective way to achieve soft, shiny, and healthy-looking hair. Don't forget to clean your diffuser regularly to avoid any build-up of dirt or hair products.
Don't Use High Heat on Wet Hair
One of the most common mistakes people make when using a blow dryer is to use high heat on wet hair. While it may seem like a faster way to dry your hair, high heat can actually cause more harm than good. Wet hair is more vulnerable and fragile than dry hair, so using high heat on it can cause it to lose its natural oils, leading to frizz and breakage.
Instead of using high heat, it is best to use a low heat setting and be patient while drying your hair. If you are short on time, you can also use a towel to gently squeeze out excess water before blow-drying.
Using a heat protectant spray or cream can also help protect your hair from the damaging effects of high heat. Simply apply it to your hair before blow-drying to help prevent damage, dryness, and split ends.
- Don't use high heat on wet hair as it can cause damage and frizz.
- Use low heat instead and be patient while drying your hair.
- Consider using a towel to remove excess water before blow-drying.
- Apply a heat protectant to your hair before blow-drying to prevent damage and dryness.
By avoiding high heat on wet hair, you can keep your hair healthy, shiny, and free from frizz and breakage.
Do Use a Low Heat Setting
If we want to achieve a salon-worthy result, we must use the right temperature. A low heat setting can be helpful to reduce damage and create a more natural look. High heat can cause damage, especially to delicate hair strands, leading to breakage and dryness. When using a blow dryer, we cannot emphasize enough the importance of keeping the heat setting at a low or moderate level. This is especially important for those with fine hair or those who want to maintain the health and beauty of their locks.
Another advantage of using a low heat setting is that it can help minimize the drying time. When we use high heat, our hair tends to become too dry, making it harder to style. With a low heat setting, we can dry our hair without causing damage and make the styling process smoother.
Remember that, for best results, we should keep the blow dryer at a safe distance from our hair (about six inches). When using high heat, a lot of moisture is removed quickly from our hair leading to frizz and tangling. However, we want to avoid these problems and create a natural and polished look, so using a low heat setting is definitely the way to go.
- Use a low heat setting to minimize damage and prevent breakage and dryness.
- Low heat can also minimize drying time and facilitate the styling process.
- Keep the blow dryer at a safe distance from your hair (about six inches).
Don't Skimp on Products
When it comes to blow-drying your hair, using the right products is just as important as using the right technique. Skimping on products can result in frizz, damage, and an overall lackluster finish.
To protect your hair and create a salon-worthy result, invest in good-quality shampoo, conditioner, and styling products specifically designed for use with heat tools. Look for products with ingredients like keratin, which can help strengthen and protect hair while reducing breakage.
Before blow-drying, apply a heat protectant spray or cream to your hair to help prevent damage from the high temperatures. This can also help reduce frizz and static.
If you have curly or textured hair, consider using a leave-in conditioner or curl-defining cream before blow-drying to help enhance and define your natural texture.
Using the right products for your hair type and texture can make all the difference in achieving a polished, salon-worthy blowout. Don't skimp on products – invest in quality and your hair will thank you.
Do Dry Your Hair in Sections
Drying your hair in sections is a crucial step to getting a salon-worthy blowout. When you section off your hair, you can focus on each part separately, ensuring you dry each section evenly.
To start, separate your hair into four or five even sections, depending on the thickness of your hair. Use hair clips to hold each section in place. Starting with the bottom sections, use a round brush to pull the hair upward while drying with your dryer. After each section is dry, move on to the next, working your way up to the top sections of your hair.
Using this method can result in a much more polished and voluminous look. It can also help prevent tangles and reduce frizz, as you're not constantly pulling your hair in different directions while trying to dry it.
Another benefit of drying your hair in sections is that it can save you time in the long run. By drying each section completely before moving on to the next, you may find that you don't need to continually go back and touch up certain areas, ultimately saving you time and frustration.
In addition to sectioning your hair, be sure to use a low or medium heat setting (depending on your hair type) and a diffuser attachment to reduce damage and create a more defined style. With these tips and tricks, you can achieve a salon-worthy blowout in the comfort of your own home.
Don't Use a Brush on Wet Hair
When it comes to blow-drying your hair, one of the biggest mistakes you can make is using a brush on wet hair. Although it may be tempting to start brushing your hair as soon as you get out of the shower, doing so can cause serious damage to your hair.
Wet hair is much more fragile than dry hair, which means that it is more prone to breakage and tangling. When you use a brush on wet hair, you are putting a lot of stress on your strands, which can cause them to snap or become tangled.
Instead of using a brush, it is best to use a wide-tooth comb on wet hair. A wide-tooth comb will help to detangle your hair without causing any damage. When you're combing your hair, be sure to start at the ends and work your way up to the roots. This will help to prevent any knotting or tangling.
If your hair is very curly or prone to tangles, you may find that it is helpful to use a leave-in conditioner or detangling spray before you start combing it. These products will help to smooth the hair and make it easier to comb through.
In summary, using a brush on wet hair is a major don't when it comes to blow-drying. To avoid breakage and tangling, opt for a wide-tooth comb instead. By following this simple rule, you can help to protect your hair and achieve a salon-worthy blowout every time.
Do Use a Wide-Tooth Comb
Using a wide-tooth comb on wet hair is a must if you want to avoid damaging your locks. Wet hair is a lot more fragile than dry hair, so it's important to be gentle when detangling. A wide-tooth comb allows you to do just that, without causing further damage.
When using a wide-tooth comb on wet hair, start by applying a good leave-in conditioner or detangling spray to your hair. This will help to minimize friction and make it easier to comb through. Then, starting from the ends of your hair, work your way up to the roots, gently combing through any tangles as you go.
If you encounter a particularly stubborn knot, resist the urge to tug or pull at it – this could cause the hair to break. Instead, hold the hair above the tangle with one hand, and use the wide-tooth comb to gently work it out. Be patient and gentle, and take your time when detangling to avoid causing damage.
Using a wide-tooth comb regularly can also help to prevent tangles from forming in the first place. I recommend combing through your hair while you're in the shower, after you've applied conditioner. This will help to distribute the conditioner evenly throughout your hair, and make it easier to detangle when you're finished.
In summary, using a wide-tooth comb on wet hair is an important part of any hair care routine. By being gentle and patient, you can avoid causing damage and keep your locks looking healthy and beautiful. So next time you're washing your hair, make sure you have a wide-tooth comb on hand!
Don't Touch Your Hair Too Much
When you're done blow-drying your hair, it can be tempting to run your fingers through your locks to check out your new look. However, touching your hair too much can cause frizz and undo all of the hard work you just put in. The oils and dirt on your hands can transfer to your hair and cause it to look greasy and unkempt.
In addition, constantly touching your hair can cause static and flyaways, undoing any smoothing efforts made during blow-drying. Try to keep your hands off your hair as much as possible. If you absolutely must touch your hair, use a light touch and be mindful of how often you're doing it.
To keep your hair looking its best, use the cold shot setting on your dryer to set your style and reduce frizz. If you find that you still have flyaways or frizz, use a small amount of pomade or hairspray to smooth them down.
Remember, the more you touch your hair, the more it will fray and the less polished your style will look. Take care of your hair and let it shine on its own!
Do Use the Cold Shot Setting
If you're looking for a salon-worthy blowout, using the cold shot setting on your dryer is a must. Not only does it help set your style, but it can also reduce frizz and add shine. Here are some tips for using the cold shot setting:
- After drying each section of hair with heat, switch to the cold shot setting for a few seconds to lock in the style.
- Use the cold shot setting to cool down your hair after using heat, as this can help reduce damage and prevent frizz.
- After applying any styling products, finish off your blowout with the cold shot setting to help set the style and add shine.
Overall, using the cold shot setting on your dryer is an easy and effective way to get a salon-worthy blowout at home. Just remember to use it after each section of heat styling, and to cool down your hair before touching it to reduce frizz.
